Compare Push Connect Fittings Soldered Fittings Compression Fittings Crimp Fittings Press Fittings Glued Fittings Our Fittings and Copper Tubing Our Fittings and CPVC Tubing Our Fittings and PEX Tubing
Copper Push Connect Fittings CPVC Push Connect Fittings Pex Push Connect Fittings Push Connect Products Push Connect Fittings Push Connect Ball Valves Push Connect Accessories Push Connect Plumbing Kits
Become a Distributor Purchase Fittings Distributor Program Tiers
Literature Installation Overview

Plumbing Applications

Permanent Push Connect™ Plumbing

Push Connect™ Plumbing Products for CPVC Tubing

In the past, CPVC tubing was commonly installed with compression fittings or a glue adhesive. However, now with Push Connect™ plumbing fittings, you longer need to worry about over or under tightening a fitting with a compression tool or the mess and patience that comes along with glue. In addition to its simplicity and ease of CPVC tubing connection, Push Connect™ fittings do not damage the tubing and can be disconnected with a simple tool in seconds. You can forget about the headaches that come with time consuming methods of pipe installation – its no wonder why so many professional plumbers and DIY homeowners are using Push Connect™ as the only solution to connecting pipe.

 

Straight Couplings Slip Couplings w/ Disconnect Clips Reducing Couplings
Push Connect Slip Coupling Push Connect Slip Couplings push connect reducing coupling

Pricing - Purchase - Distributing - Contact Us

Our push connect straight couplings allow for quick and easy installation with no glues, solder or flux. Simply clean the pipe and push to connect for a solid quick connection coupling that works on PEX, CPVC or Copper pipe. ProBite's push fittings and valves are priced up to 45% less than competition and are made of solid brass.

Part Number:

  • 3/8” x 3/8” - PB801
  • 1/2” x 1/2” - PB811
  • 3/4” x 3/4” - PB821
  • 1” x 1” - PB831

Features and Benefits

  • Clean Installation - No Soldering, Crimping or Gluing
  • Quick Connection Plumbing Technology
  • Repositionable and reusable
  • Tested by IAPMO to 200 PSI
  • 75 Year Warranty

Pricing - Purchase - Distributing - Contact Us

Push Connect's Slip Couplings are great for repairing pieces of pipe. They are available in various sizes and can be used with Copper, CPVC or even PEX Tubing. The Push Connect™ Slip Couplings come with the the Disconnect Clip made for that

Part Number:

  • 1/2” x 1/2” - PB817 w/ Disconnect Clip
  • 3/4” x 3/4” - PB827 w/ Disconnect Clip
  • 1” x 1” - PB837 w/ Disconnect Clip

Pricing - Purchase - Distributing - Contact Us

Quick Connect Reducing Coupling allows an easy way to reduce a variety of pipe and tubing materials: Copper, CPVC, and PEX tubing in any combination. The Quick Fitting™ technology allows for fast, easy removal, inspection, and re-installation.

Part Number:

  • 3/8” x 1/2” - PB8401
  • 3/4” x 1/2” - PB841
  • 1” x 3/4” - PB8431

Features & Benefits:

  • Reduce variety of pipe and tubing materials
  • Manufacturing, Municipal, Residential, and Commercial applications
  • Fluids, Inert Gases, Water, and Air
  • Eliminates soldering, glues, and compression tools and wrenches
     
FNPT Straight Female Adapters MNPT Straight Male Adapters Elbows
Straight Female Push Connect™ Adapter Straight Male Push Connect™ Adapter push connect elbow fittings

Pricing - Purchase - Distributing - Contact Us

Our female Push Connect™ adapter is great for a quick, solid connection that lasts. In fact, Push Connect fittings carry the industries best warranty at 75 years! Our push fittings allow for permanent or removable applications. For removal, simply use the removal tool and reposition or reusable female adapter for different situations.

Part Number:

  • 3/8” x 3/8” - PB802F
  • 1/2” x 1/2” - PB812F
  • 3/4” x 3/4” - PB822F
  • 1/2” x 3/4” -PB842F
  • 1” x 1” - PB832F

Features & Benefits:

  • Priced up to 45% less than competition!
  • Push Fitting Technology
  • Easy Installation
  • Quick Connect Female Adapter for PEX, CPVC and Copper pipe

Pricing - Purchase - Distributing - Contact Us

Use on PEX, CPVC or Copper pipe! The Push Connect™ male Push Connect™ adapters are simple and easy to use. No tools are necessary to connect the push adapter fitting and a standard wrench will allow you to install the male thread in seconds. Our male push connection adapters are versatile and work great in a variety of plumbing applications: hot water, chilled water, potable water, fluid transfer and many more!

Part Number:

  • 3/8” x 3/8” - PB802M
  • 1/2” x 1/2” - PB812M
  • 3/4” x 3/4” - PB822M
  • 1/2” x 3/4” - PB842M
  • 1” x 1” - PB832M

Features & Benefits:

  • Push Fit Male Adapter
  • Quick and Easy Installation
  • Quick Connect Adapter for PEX, CPVC and Copper pipe

Pricing - Purchase - Distributing - Contact Us

Push Connect™ Elbows can be used on a variety of pipe and tubing materials: Copper, CPVC or PEX tubing. With the ability to connect pipe in seconds with our quick fitting technology you can forget about the time spent and mess made with glues, soldering, and compression tools.

Part Number:

  • 3/8” x 3/8” - PB803
  • 1/2” x 1/2” - PB813
  • 3/4” x 3/4” - PB823
  • 1” x 1” - PB833
  • 3/4” x 1/2” - PB843

Features & Benefits:

  • Union connection at every joint
  • Quick connect elbows
  • Fluids, Inert Gases, Water and Air
  • Elbows Push Connect to Copper, CPVC and PEX tubing
     
FNPT Elbow Drop Ears Elbow FNPTs Elbow MNPTs
push connect elbow drop ear push connect Elbow FNPT push connect elbow mnpt fittings

Pricing - Purchase - Distributing - Contact Us

The Push Connect™ 90 degree drop ear can be used on a variety of pipe and tubing materials. With an instant push-fit connection for ease of use, you can securely connect Copper, CPVC, and PEX tubing in any combination. 

Part Number:

  • 3/8” x 3/8” - PB803D
  • 1/2” x 1/2” - PB813D

Features & Benefits:

  • 90 degree connection
  • Push fit connection
  • Fluids, Inert Gases, Water and Air
  • Repairable O-ring

Pricing - Purchase - Distributing - Contact Us

Push Connect™ FNPT Insert to Connect Elbows are used in a variety of applications using Copper, PEX tubing, or CPVC for potable water, heating, cooling, treated water, breathable air, condensers, and much more.

Part Number:

  • 3/8” x 3/8” - PB803F
  • 1/2” x 1/2” - PB813F

Features & Benefits:

  • Female Connector Elbow
  • Elbows are Removable and Reusable
  • Push fit connection with 75 year warranty
  • Fluids, Inert Gases, Water and Air
  • Durable and Professional Quality
  • Repairable O-ring

Pricing - Purchase - Distributing - Contact Us

Push Connect™ MNPT Quick Connect Elbows are used in a variety of applications using Copper, PEX tubing, or CPVC for potable water, heating, cooling, treated water, breathable air, condensers, and much more.

Part Number:

  • 3/8” x 3/8” - PB803M
  • 1/2” x 1/2” - PB813M

Features & Benefits:

  • Male Connector
  • Elbows are Removable and Reusable
  • Push to connect technology
  • Fluids, Inert Gases, Water and Air
  • Durable and Professional Quality
  • Repairable O-ring
     
Tees Reducing Tees Endstops
Push Connect Tee Fittings Push Connect Reducing Tee push connect stop end fitting

Pricing - Purchase - Distributing - Contact Us

Push Connect™ tee works on PEX, CPVC or Copper pipe. Our quick connect tees and fittings are priced up to 45% less than competition and carry the industry's best warranty at 75 years! Use as a removable or permanent Push Connect™ tee. Our push fit tees also allow for the connection of a variety of different pipes so you can easily adapt to any plumbing application. The quick disconnect tee is great for residential or commercial applications.

Part Number:

  • 3/8” x 3/8” x 3/8” - PB804
  • 1/2” x 1/2” x 1/2” - PB814
  • 3/4” x 3/4” x 3/4” -PB824
  • 1” x 1” x 1” - PB834

Features & Benefits:

  • Push Connect™ Tee
  • Quick Connect Tee for PEX, CPVC, or Copper Pipe
  • Tested by IAPMO to 200 PSI
  • Push Tee allows for safe and quick installation with no flame or mess

Pricing - Purchase - Distributing - Contact Us

The Push Connect™ Reducing Tea allows for an easy way to connect and reduce pipe. While connecting to Copper, CPVC, and PEX tubing in any combination, the push-fit technology eliminates the extra work of having to solder or use messy glues. At the same time of eliminating the extra hours spent on installation, you can make a secure connection that will last much longer than other methods. 

Part Number:

  • 3/4” x 3/4” x 1/2” - PB844
  • 3/4” x 1/2” x 1/2” - PB815
  • 1/2” x 3/4” x 3/4” - PB825
  • 1” x 1” x 3/4” - PB835

Features & Benefits:

  • Quick Connect Reducing Tee
  • Manufacturing, Municipal, Residential, and Commercial applications
  • Potable water, heating, cooling, treated water, breathable air, condensers and more

Pricing - Purchase - Distributing - Contact Us

Push Connect™ removable stop end connector is often used in central heating systems. Our push fit stop end is great for pressure testing or for any application where water may need to be interrupted or stopped for any reason. Push Connect™ stop ends are great for quick connection and easy removal so you can continue flow or allow another extension. These are great for direct or indirect cold water systems, unvented and vented hot water systems and sealed central heating systems.

Part Number:

  • 3/8” - PB806
  • 1/2” - PB816
  • 3/4” - PB826
  • 1” - PB836

Features & Benefits:

  • Quick Connect Removable Stop End
  • Quickly Stop or Interrupt the flow of fluid, gas, or air
  • Easy removal allows you to continue flow
     
Integrated Full Port Ball Valves 1/4 Turn Straight and Angle Mini Valves Appliance Straight Stop Valves
push connect ball valve push connect stop fitting push connect straight valve

Pricing - Purchase - Distributing - Contact Us

Push Connect™ ball valve has no restrictions and offers full flow throughout. Used for Copper, CPVC and PEX tubing, our quick connect ball valves are perfect for manufacturing, municipal, residential, and commercial shut off applications.

Part Number:

  • 1/2” x 1/2” - PB912
  • 3/4" x 3/4" - PB922
  • 1" x 1" - PB932

Features & Benefits:

  • Insert-to-Connect Ball Valves
  • Complete shut off capability with no leaks
  • Repairable Seals
  • Stop Leaks or Pipe Testing
  • Eliminates glues, soldering, and special tools

Pricing - Purchase - Distributing - Contact Us

Push Connect™ quarter turn angle stop valve allows you to quickly connect copper, CPVC and PEX tubing in seconds. The 1/2" x 3/8" quick connect angle stop valve allows for connection for a variety of plumbing applications and is great for connecting toilets and sinks without the hassle of soldering, crimping or gluing. Many other quick connection fittings require special tools for installation. With Push Connect™ plumbing technology, you simply use your hands to connect the fitting. If you ever need to remove a plumbing fitting you can simply use the Push Connect™ disconnect tool.

Part Number:

  • 1/2” x 3/8” OD. - PB953A
  • 1/2” x 3/8” OD. - PB953S

Features & Benefits:

  • 1/2" FIP Inlet x 3/8" OD
  • Push to Connect - Requires no soldering
  • Slim fitting design allows for installation in tight spaces
  • Removable and Reusable Plumbing Fitting
  • Works on PEX, CPVC, Copper

Pricing - Purchase - Distributing - Contact Us

Part Number:

  • 1/2” x 3/8” OD. 1/4 Turn Valve - PB953S
  • 1/2” x 1/2” OD. 1/4 Turn Valve - PB974S

Applications:

  • Kitchen faucet
  • Bath fixtures
  • Toilet supply line
  • Ice makers
  • Dishwasher waterline supply
     
Appliance Angle Stop Valves (Ice Maker) Appliance Tee Stop Valves (Ice Maker) Appliance Straight Stop Valves (Ice Maker)
push connect angle stop valve push connect tee stop valve push connect ice maker straight stop valve

Pricing - Purchase - Distributing - Contact Us

Part Number:

  • 1/2” x 1/4” OD. 1/4 Turn Valve - PB944A (used for Ice Maker)
  • 1/2” x 3/8” OD. 1/4 Turn Valve - PB953A

Applications:

  • Kitchen faucet
  • Bath fixtures
  • Toilet supply line
  • Ice makers
  • Dishwasher
  • Ice maker supply line valve (new installation and saddle valve replacement use PB944T)

Pricing - Purchase - Distributing - Contact Us

Part Number:

  • 1/2” x 1/2” x 1/4” OD. 1/4 Turn Valve - PB944T (used for Ice Maker)
  • 1/2” x 1/2” x 3/8” OD. 1/4 Turn Valve - PB954T

Applications:

  • Ice maker supply line valve (new installation and saddle valve replacement use PB944T)
  • Dishwasher waterline supply
  • General hot & cold water distribution

Pricing - Purchase - Distributing - Contact Us

Part Number:

  • 1/2” x 1/4” OD. 1/4 Turn Valve - PB944S

Applications:

  • Ice maker supply line valve (new installation and saddle valve replacement use PB944T)
     
Disconnect Tool Stiffener, Hi-Flo Contractor Starter Kit
Push Connect Straight Coupling Hi Flo - PEX Tubing Inserts Contactor Starter Kit

Pricing - Purchase - Distributing - Contact Us

The Push Connect™ Disconnect Tool is used for quick and easy fitting removal in all plumbing applications. The Push Connect™ Disconnect Tool is available in all standard fitting sizes to ensure a quick and proper fitting removal every time.

Part Number:

  • 3/8” - PB701
  • 1/2” - PB711
  • 3/4” - PB721
  • 1" - PB731

Pricing - Purchase - Distributing - Contact Us

The Push Connect™ Hi-Flo stiffener makes PEX plumbing easy. When added to the Push Connect™ plumbing fittings, it creates a secure PEX connection in seconds.

Part Number:

  • 1/2” - PB712
  • 3/4” - PB722
  • 1" - PB732

Pricing - Purchase - Distributing - Contact Us

The Push Connect™ contractor kit is a must have for DIY small jobs and contractors and plumbers on the go. The Push Connect™ contractor kit comes complete with everything you would need for the everyday common plumbing application. Save time by keeping a Push Connect™ contractor kit in the car or on the job for a fast and easy plumbing repair every time.

Part Number:

  • PBC375

Features Include:

  • Handy tool carrying case
  • Wide assortment of push connect plumbing fittings and accessories including:

    2 each: PB811, 821, 841, 812F, 822F, 812M, 822M, 813, 823;

    1 each: PB814, 824, 816, 826, 711, 722, 80003
     
Irrigation Starter Kit    
Irrigation Starter Kit    

Pricing - Purchase - Distributing - Contact Us

The Push Connect™ Irrigation Kit comes complete with everything you would need for common irrigation and sprinkler application. When ordering the Push Connect™ Irrigation Kit, you can be sure that you will get everything you need to get your irrigation job done easily every time.

Part Number:

  • PBK500
Features Include:
  • Handy tool carrying case
  • Wide assortment of push connect plumbing fittings and accessories including:

    2 each: PB821, 831, 822M, 832M, 823, 833;

    1 each: 822F, 832F, 824, 826, 836, 722, 731, 80003
   



Copyright PushConnect.com 2009 - push connect™ plumbing fittings by Quick Fitting™